Attributes:
- manual plant filling
- electrical stirring device
- micro filter for permanent use
- rough filter for one way use
- filtration with dewatering container
Instructions
- put wastewater into the plant.
- stirring device „on“
ATTENTION: before you start, be sure of right rotation of stirring
device; do not start before you are sure of enough depth of
wastewater charge
- add coagulation aid (quantity has to be tested in bench seale
test unit)
- stirring time ca. 20 min. control the flocculationprogress, if
not sufficient add some coagulation aid
- stirring device „off“
- open the gate ralve and drain the sludge by bag filtration
Technical data for the stirring device:
- quick mixer type SR4/0,25-71/4
- material: 1.4571
- shaft length: 400 mm (L=20 mm)
- stirring device: Propeller, 1 Stk.L= 100 mm
motor data:
- power: 0,25 kW
- no. of revolutions: 1500 UpM
- voltage: 230/400V/50Hz/Iso.F/IP55/S1
- rated current 400V: 0,87A
- material: PPh (Polyprophylen)
- dimensions: (B x T x H) 750 mm x 750 mm x 1500 mm
- weight: 80,00 Kg
- Ein-/Ausschalter / "ON/OFF" bzw. "0 / 1"
- connection: 400 Volt -16 Ampere CE plug
principle of precipitation an flocculation with our high grade
seperating agent Floculant! |
